Product Information


ESTIMATE SIZE FONT TO ORDER


To estimate the size font to order, multiply the total usable length of the signboard (twice that if the sign has two sides) by the recommended quantity in the chart below.

In order to assure sufficient letters for any message, and to insure basic merchandising needs, a minimum of 150 letters should be ordered.

Quick Reference Chart

Letter Amount to Order Amount to Fit Distance Recommended
Size (per linear foot) (per 10 linear feet) Visibility board (length)
2” 16 74 65’ 4’
3” 10 48 100’ 4’
4” 8 34 ½ 150’ 4’ to 8’
6” 5 ½ 24 200’ 6’ to 10’
8” 4 18 ½ 350’ 8’ to 12’
10” 3 ½ 14 ½ 450’ 10’ to 14’
12” 3 12 525’ 12’ to 16’
15” 2 ½ 9 ½ 630’ 16’ and over
17” 2 8 ½ 710’ 16’ and over

QI Track Spacing

Letter Size
1 Line of Copy 7 ½” 9 ½” 12 ½” 14 ½” 16 ½” 19 ½” 21 ½”
2 Lines of Copy 13 3/8” 17 3/8” 23 3/8” 27 3/8” 31 3/8” 37 3/8” 41 3/8”
3 Lines of Copy 19 ¼” 25 ¼” 34 ¼” 40 ¼” 46 ¼” 55 ¼” 61 ¼”
4 Lines of Copy 25 1/8” 33 1/8” 45 1/8” 53 1/8” 61 1/8” 73 1/8” 81 1/8”
5 Lines of Copy 31” 41” 56” 66” 76” 91” 101”


   Track Spacing

Using Dual Tracking System
(Chart is NOT to scale)

V.O. = Visible Opening



NUMERAL “POCKET” TRACK SYSTEM




“POCKET SUPPORT MOUNTING SYSTEM”

The pocket mounting system is strongly recommended for 15” and above. The Pocket support mounting system is designed to support each numeral from bowing and falling off a sign. All numerals must have the same width with the exception of the tenth panel. The vertical and horizontal tracks form individual pockets with open tops allowing the numeral to drop in.

INSTRUCTIONS FOR PROPER USE TO PROVIDE MAXIMUM SUPPORT
  1. Mount a bottom track horizontally for the full width of all your numerals
  2. Mount vertical pieces of bottom tracks on both ends of the numerals
  3. Mount dual track between each numeral

If you have any questions or concerns, contact Quality Image and ask for technical support